##### Page tree
Go to start of banner

# Security of Transmission

You are viewing an old version of this page. View the current version.

Version 7

Security constrained unit commitment (SCUC)

The objective of the SCUC is to minimize the operation costs.

Due to the existance of transmission constraints is very difficult to obtain feasible solutions to the SCUC problem. To obtain feasible solutions, [1] propose to adjust the generation levels with the committment states obtained in the dual solution of the Langrangian relaxation.

[1] Xiaohong Guan, Sangang Guo and Qiaozhu Zhai, "The conditions for obtaining feasible solutions to security-constrained unit commitment problems," in IEEE Transactions on Power Systems, vol. 20, no. 4, pp. 1746-1756, Nov. 2005.

[2] B. Hu and L. Wu, "Robust SCUC Considering Continuous/Discrete Uncertainties and Quick-Start Units: A Two-Stage Robust Optimization With Mixed-Integer Recourse," in IEEE Transactions on Power Systems, vol. 31, no. 2, pp. 1407-1419, March 2016.

Optimal Power Flow (OPF)

In the optimal flow problem, the generation and transmission of electric energy is optimised, taking into account the active and reactive power generation limits, demand requirements, bus voltage limits, and network flow limits. Due to the non-linear power flow constraints, OPF is formulated as a non-convex optimisation problem that is generally difficult to solve.

The problem was first formulated in 1962 and a large number of optimization algorithms and relaxations have been proposed since then. A popular approximation, the directed-current optimal power flow (DCOPF), is based on the linear programming problem that is obtained through the linearisation of the power flow equations. While DCOPF is useful in a wide variety of applications, a solution of DCOPF may not satisfy the non-linear power flow equations and hence the resulting solution may be infeasible and may be of limited utility. Other types of algorithms that were studied for the OPF include Newton Raphson, quadratic programming, nonlinear programming, Lagrangian relaxation, interior point methods, genetic algorithms, and other heuristics. Although some of these algorithms can handle large-scale networks most them can only compute a local optimal usually without assurance on the quality of the solution.  That is because most of the algorithms rely on the Karush-Kuhn-Tucker necessary conditions of optimality, which cannot even guarantee a locally optimal solution, in the non-convex problem. Alternatively, the OPF can be formulated as a quadratically constrained quadratic program. There, convex relaxations within second-order cone (SOCP) programming and semidefinite programming (SDP) can be applied. In contrast to the other proposed approaches, convex relaxations make it possible to check if a solution is globally optimal. If the solution is not optimal, the relaxations provide a lower bound and hence a bound on how far any feasible solution is from optimality. In particular, Bai et al. proposed a semidefinite programming relaxation for the ACOPF for general networks, which makes it possible to find globally optimal solutions for several well-known instances. More recently, the moments and sum-of-square decomposition have been used to build hierarchies of improving SDP relaxations for a polynomial programming formulation of Alternating Current Optimal Power Flow Problem (ACOPF). To overcome the computational complexity of using SDP and polynomial programming, graph sparsity has been exploited to simplify the SDP relaxation of the OPF.

To further improve the scalability of SDP relaxations, Alternating Direction Method of Multipliers (ADMM) -based computation can be used to solve sparse, large-scale SDPs. Alternatively, cheaper hierarchies are being investigated based on LP and SOCP relaxations. In the future, a combination of hierarchies mixing constraints from different cones may be envisioned.

Another issue to address is development of techniques to certify infeasibility of optimal power flow instances.

From an industrial point of view, dealing with incomplete data is one of the issues models and tools have to address. Aggregations of industrial data may lead to physically non-meaningful models, since some section of the power network are not represented in the data.

References:

J. Carpentier, Contribution to the economic dispatch problem, Bulletin Society Francaise Electriciens, vol. 3, no. 8, pp. 431-447, 1962.

X. Bai, H. Wei, K. Fujisawa and Y. Wang, Semidefinite programming for optimal power flow problems, International Journal of Electric Power & Energy Systems, vol. 30, no. 6-7, pp. 383-392, 2008.

J. Lavaei and S. H. Low. "Zero duality gap in optimal power flow problem." IEEE Transactions on Power Systems, vol. 27, no 1, pp. 92-107, 2012.

S.H. Low . "Convex relaxation of optimal power flow, part I: Formulations and equivalence." IEEE Transactions on Control of Network Systems, vol. 1, no. 1, pp. 15-27, 2014.

X. Kuang, approximating the ACOPF problem with hierarchy of SOCP problems, 2015.

Madani, Kalbat, Lavaei, ADMM for Sparse Semidefinite Programming with Applications to Optimal Power Flow problem.

Molzahn (2013), Sufficient conditions for power flow in-solvability with applications to voltage stability margins.

Coffrin, Hijazi (2015), The QC relaxation: Theoretical and Computational Results on Optimal Power Flow, IEEE Trans. Power Systems, Vol. PP, Issue 99

OPF specific software

PowerTools

PowerTools is an open source c++ mathematical modeling platform linking to state-of-the-art optimization solvers. It implements problems such as Optimal Power Flow, and Optimal Transmission Switching, while benefiting from cutting-edge research results.

These include smart on/off constraints modeling, efficient bound propagation, domain-specific cut generation techniques and tight convexification procedures providing global optimality guarantees.

-> Add Reference for PowerTools applied to OPF

Matpower

Zimmerman, R., Murillo-Sanchez, C., Thomas, R.: Matpower: Steady-state operations, planning, and analysis tools for power systems research and education. Power Systems, IEEE Transactions on 26(1),12–19 (2011).

D. K. Molzahn, J. T. Holzer, B. C. Lesieutre and C. L. DeMarco, "Implementation of a Large-Scale Optimal Power Flow Solver Based on Semidefinite Programming," in IEEE Transactions on Power Systems, vol. 28, no. 4, pp. 3987-3998, Nov. 2013.

Kristiansen (2003), Utilising Matpower in Optimal Power Flow, Model Identification and Control, Vol 24, No 1, pp. 49-59.

Lavei, Rantzer, Low (2011), Power Flow Optimisation using positive quadratic programming

OPFsolver

Madani, R., Ashraphijuo, M., Lavaei, J. (2014) SDP solver for Optimal Power Flow User’s Manual.

Madani, Ashraphijuo, Lavaei (2014), Promises of Conic Relaxations for Contingency constrained OPF, IEEE Trans. Power Systems.

PSSE

G. P. Harrison and A. R. Wallace, "Optimal power flow evaluation of distribution network capacity for the connection of distributed generation," in IEE Proceedings - Generation, Transmission and Distribution, vol. 152, no. 1, pp. 115-122, 10 Jan. 2005.

Plexos

PLEXOS for power systems (2013)

Foley, A. (2010), A strategic review of electricity system models, Energy, Vol 35 (12), No. 12, pp. 4522-4530.

General purpose solver applied to OPF

CPLEX

Alguacil, N., & Conejo, A. J. (2000). Multiperiod optimal power flow using Benders decomposition. Power Systems, IEEE Transactions on, 15(1), 196-201.

Jabr, R. (2008). Optimal power flow using an extended conic quadratic formulation. Power Systems, IEEE Transactions on, 23(3), 1000-1008.

Alsac, O., Bright, J., Prais, M., & Stott, B. (1990). Further developments in LP-based optimal power flow. Power Systems, IEEE Transactions on, 5(3), 697-711.

MOSEK

R. A. Jabr, "Radial distribution load flow using conic programming," in IEEE Transactions on Power Systems, vol. 21, no. 3, pp. 1458-1459, Aug. 2006.

B. Kocuk, S. S. Dey and X. A. Sun, "Inexactness of SDP Relaxation and Valid Inequalities for Optimal Power Flow," in IEEE Transactions on Power Systems, vol. 31, no. 1, pp. 642-651, Jan. 2016.

Molzahn (2015), Solution of optimal power flow problems using moment relaxations augmented with objective function penalisation

Xpress

• No labels